Re: Re: Chris Andeson there?

From: Jalo Porkkala ^lt;jalo.porkkala@luukku.com>
Date: 10/07/04-12:25:36 PM Z
Message-id: <1097173536060.jalo.porkkala.241584.Eu0kgehYGCQIKOirm_Ts6w@luukku.com>

George, see:

http://www.inksupply.com/index.cfm?source=html/2200wh.html

- jalo

res1dvao@verizon.net kirjoitti 07.10.2004 kello 21:09:
> I tried the suggestion of Mark Nelson by setting my 2200 to Premium
> Glossy
> Photo Paper and had the same problem as always. Right before the paper
> exits the printer there is a set of wheels, larger on the bottom
> than the
> top. The top wheels lift or smear the still wet ink, leaving tracks
> on the
> film material. Other than that it works fine. Just can't use the
> negative
> to print.
>
> Any suggestions anyone?
>
> George
> >
> > From: "Christina Z. Anderson" <zphoto@bellsouth.net>
> > Date: 2004/10/05 Tue PM 12:17:45 GMT
> > To: alt-photo-process-l@sask.usask.ca
> > Subject: Re: Chris Andeson there?
> >
> > Good morning Mark,
> > The thing is, they print up gum negs just fine, no smearing for me.
> > I"ve printed now over 100 11x17's on the stuff. I'm using the semigloss
> > setting. But Marek has problems with them printing his pt/pd negs, so
> I'm
> > interested to see what gives. We're both on the 2200.
> >
> > Besides, I expect nothing less from you than miracles...
> > Chris
> > ----- Original Message -----
> > From: <Ender100@aol.com>
> > To: <alt-photo-process-l@sask.usask.ca>
> > Sent: Tuesday, October 05, 2004 2:15 AM
> > Subject: Re: Chris Andeson there?
> >
> >
> > Hi Chris,
> >
> > I fear my system is unable to work miracles. I doubt you need a curve
> or
> > anything to test potential film material?just print on it and see if it
> > smears
> > when it comes out of the machine?if it does smear, don't waste your time
> > with
> > it trying to get it to work. It should be able to hold the ink when the
> > printer is set to Premium Glossy Photo Paper. Once it passes the smear
> > test, then
> > try a step tablet and a gradient and see if they print smoothly. If it
> > passes that test, then try printing with it and see what results you get.
> It
> > all
> > has to do with the ink set you are using?they are either compatible with
> the
> > film or not. After that it becomes an issue of the ability of the
> > substrate to
> > hold a good image.
> >
> > Mark Nelson
> >
> >
> >
>
---------------------------------------------------
Jalo Porkkala
Juhanintie 24
29600 Noormarkku

puh. 0500-729224
http://personal.inet.fi/surf/porkkala
---------------------------------------------------

..............................................................
 MTV3 Laajakaista - Hauskemman elämän puolesta.
 http://www.mtv3.fi/liittyma/hankinta/laajakaista/
Received on Thu Oct 7 12:26:14 2004

This archive was generated by hypermail 2.1.8 : 11/03/04-10:51:22 AM Z CST