Re: Re: Chris Andeson there?

What a great idea. I will try it. Thanks

George
>
> From: Jalo Porkkala <jalo.porkkala@luukku.com>
> Date: 2004/10/07 Thu PM 06:25:36 GMT
> To: alt-photo-process-l@sask.usask.ca
> Subject: Re: Re: Chris Andeson there?
>
> George, see:
>
> http://www.inksupply.com/index.cfm?source=html/2200wh.html
>
> - jalo
>
> res1dvao@verizon.net kirjoitti 07.10.2004 kello 21:09:
> > I tried the suggestion of Mark Nelson by setting my 2200 to Premium
> > Glossy
> > Photo Paper and had the same problem as always. Right before the paper
> > exits the printer there is a set of wheels, larger on the bottom
> > than the
> > top. The top wheels lift or smear the still wet ink, leaving tracks
> > on the
> > film material. Other than that it works fine. Just can't use the
> > negative
> > to print.
> >
> > Any suggestions anyone?
> >
> > George
> > >
> > > From: "Christina Z. Anderson" <zphoto@bellsouth.net>
> > > Date: 2004/10/05 Tue PM 12:17:45 GMT
> > > To: alt-photo-process-l@sask.usask.ca
> > > Subject: Re: Chris Andeson there?
> > >
> > > Good morning Mark,
> > > The thing is, they print up gum negs just fine, no smearing for me.
> > > I"ve printed now over 100 11x17's on the stuff. I'm using the semigloss
> > > setting. But Marek has problems with them printing his pt/pd negs, so
> > I'm
> > > interested to see what gives. We're both on the 2200.
> > >
> > > Besides, I expect nothing less from you than miracles...
> > > Chris
> > > ----- Original Message -----
> > > From: <Ender100@aol.com>
> > > To: <alt-photo-process-l@sask.usask.ca>
> > > Sent: Tuesday, October 05, 2004 2:15 AM
> > > Subject: Re: Chris Andeson there?
> > >
> > >
> > > Hi Chris,
> > >
> > > I fear my system is unable to work miracles. I doubt you need a curve
> > or
> > > anything to test potential film material?just print on it and see if it
> > > smears
> > > when it comes out of the machine?if it does smear, don't waste your time
> > > with
> > > it trying to get it to work. It should be able to hold the ink when the
> > > printer is set to Premium Glossy Photo Paper. Once it passes the smear
> > > test, then
> > > try a step tablet and a gradient and see if they print smoothly. If it
> > > passes that test, then try printing with it and see what results you get.
> > It
> > > all
> > > has to do with the ink set you are using?they are either compatible with
> > the
> > > film or not. After that it becomes an issue of the ability of the
> > > substrate to
> > > hold a good image.
> > >
> > > Mark Nelson
> > >
> > >
> > >
> >
> ---------------------------------------------------
> Jalo Porkkala
> Juhanintie 24
> 29600 Noormarkku
>
> puh. 0500-729224
> http://personal.inet.fi/surf/porkkala
> ---------------------------------------------------
>
>
> ..............................................................
> MTV3 Laajakaista - Hauskemman elämän puolesta.
> http://www.mtv3.fi/liittyma/hankinta/laajakaista/
>
>
Received on Thu Oct 7 12:39:42 2004