Re: Sorry to ask again but...

From: etienne garbaux <photographeur_at_nerdshack.com>
Date: Tue, 29 Aug 2006 23:58:53 -0400
Message-id: <p05210600c11abae301f5@[192.168.1.101]>

Sandy wrote:

> placing a thin piece of glass on the top of the scanner, with the
> emulsion of the film placed in contact with that glass

Do you do anything to prevent Newton rings between the scanner glass
and the auxiliary glass?

I've been spoiled by the Microtek, which places transparencies below
the scanner optics rather than on the top glass. Film up to 4x5 is held
in very nicely designed glassless holders, while larger film is placed
on a glass support (but not imaged through the glass).

Best regards,

etienne
Received on 08/29/06-10:06:00 PM Z

This archive was generated by hypermail 2.2.0 : 09/01/06-12:02:08 PM Z CST