Hello all,
I have a problem that some of you may know the answer to or recognize.
When I mask the negative by placing a rubylith window on top of the
negative between it and the glass of the contact frame I get a fine
line of exposed emulsion (develops out to be a fine line on all four
sides of the image) where the edge of the negative is. But, the mask
window is smaller than the image on the negative and covers the edge of
the negative. When I place the mask between the neg. and paper the
problem goes away, but the contact is poor at the edges of the images.
Do you think light could be travel horizontally through the negative
and causing an exposure at it's very edges ( a bit like fiber optics)?
I TAed for a professional platinum printer ( Arkady Lavov) and he told
me this would happen and that I should just place the mask between the
negative and paper, but he never told me why. Does anybody else
recognize this problem or am I just mad?
It really bugs the hell out of me. Any help would be much appreciated.
Matt
Received on 06/29/06-01:54:47 PM Z
This archive was generated by hypermail 2.2.0 : 07/28/06-08:55:14 AM Z CST