October 2005 Alt-Photo-Process-L By Author

AuthorSubject Date
Agustin Barrutia
 Re: Agfa to close doors10/22/05-08:43:18 PM Z
 Re: wide-angle lens for 4x510/18/05-03:44:04 PM Z
 Ny10/13/05-12:25:11 PM Z
 NY Shows and galleries10/11/05-05:09:16 PM Z
 Re: Best CI for process10/01/05-10:59:58 AM Z
Alex Chater
 A410/02/05-03:49:18 PM Z
altprinter
 Re: Magnani Pescia et al.. for gumprinting10/24/05-08:32:29 AM Z
 Re: gelatin10/20/05-08:57:28 AM Z
Anne van Leeuwen & Peter Hoffman
 Workshops?10/28/05-04:04:21 PM Z
 Gelatin sizing/cyan/gum10/26/05-04:56:17 AM Z
 cyanotype with gum10/23/05-03:53:34 PM Z
 Re: gelatin10/21/05-02:54:53 PM Z
 Re: gelatin10/20/05-10:21:51 AM Z
Argon3@aol.com
 Re: Fume hood10/29/05-11:37:31 AM Z
 Re: polaroid camera question10/25/05-09:49:26 AM Z
 Re: polaroid camera question10/25/05-07:38:29 AM Z
 Re: DIY Fume Hood10/24/05-07:08:28 PM Z
 Re: wide-angle lens for 4x510/18/05-11:50:15 AM Z
Barry Kleider
 Re: Vietnam10/24/05-01:38:05 PM Z
 Re: solar plate10/24/05-09:41:50 AM Z
Best, Dianne
 RE: Fume hood10/31/05-12:20:48 PM Z
 RE: Fume hood10/31/05-07:27:10 AM Z
 Fume hood10/28/05-11:51:36 AM Z
 RE: Ready Made POP10/14/05-08:00:13 AM Z
Bill William
 Re: Vietnam10/26/05-03:12:07 AM Z
 Re: Vietnam10/21/05-12:35:04 PM Z
 Vietnam10/21/05-04:34:16 AM Z
BOB KISS
 RE: Agfa to close doors10/24/05-05:33:23 AM Z
 RE: Agfa to close doors10/22/05-01:14:43 PM Z
 RE: Selective toning of cyanotypes-late reply10/16/05-04:11:08 PM Z
 RE: Selective toning of cyanotypes-late reply10/16/05-04:55:58 AM Z
 RE: NY Shows and galleries10/12/05-06:52:50 AM Z
Bob Maxey
 Re: Fume hood10/29/05-03:03:24 AM Z
 Re: OT; Wikipedia & Aqua Regia - OT, Stamp Collections10/29/05-03:00:18 AM Z
 Re: Wikipedia10/21/05-10:56:38 PM Z
 Re: Acceptable Chemical Grades For Alt?10/21/05-05:27:21 PM Z
 Re: gelatin10/20/05-05:09:21 PM Z
 Re: Acceptable Chemical Grades For Alt?10/20/05-05:17:35 PM Z
br photog
 Re: chromoskedasic sabattier10/14/05-12:28:46 PM Z
Breukel, C. (HKG)
 RE: Gum over Palladium10/28/05-01:07:24 AM Z
 RE: Gum over Palladium10/27/05-02:18:58 AM Z
 RE: Gum over Palladium10/26/05-01:53:05 AM Z
 Gum over Palladium10/26/05-01:35:41 AM Z
 OT; Wikipedia & Aqua Regia10/25/05-01:35:38 AM Z
 Making PlatniumChloride out of Platinum wire10/24/05-05:52:12 AM Z
 RE: VDB10/13/05-02:11:38 AM Z
 Saran Film. was: RE: my first van dyke!!10/12/05-02:42:44 AM Z
 RE: my first van dyke!!10/11/05-09:01:24 AM Z
 RE: my first van dyke!!10/11/05-08:22:32 AM Z
Brian Casey
 RE: Agfa to close doors/Agfa Scala question10/26/05-05:04:48 PM Z
Carmen Lizardo
 RE: sources for uv exposure units or plate makers? (or any hints on how toget good good contct?)10/31/05-11:03:48 AM Z
 Re: sources for uv exposure units or plate makers? (or any hints on how toget good good contct?)10/29/05-11:09:41 AM Z
 sources for uv exposure units or plate makers? (or any hints on how to get good good contct?)10/28/05-01:57:13 PM Z
 Re: report on cynotype and acid and a chemistry question.10/27/05-07:48:59 PM Z
 Re: report on cynotype and acid and a chemistry question.10/25/05-04:33:06 PM Z
 report on cynotype and acid and a chemistry question.10/24/05-04:14:00 PM Z
 RE: Matte Translucent Film for inkjet printer, can someone recommend?10/23/05-03:04:59 PM Z
 RE: Matte Translucent Film for inkjet printer, can someone recommend?10/22/05-12:21:32 PM Z
 Matte Translucent Film for inkjet printer, can someone recommend?10/22/05-10:41:29 AM Z
 Re: gelatin10/21/05-04:41:39 PM Z
 Re: solar plate10/21/05-11:10:57 AM Z
 if I consider using glut...many questions!10/04/05-08:46:23 AM Z
Christina Z. Anderson
 Re: report on cynotype and acid and a chemistry question.10/27/05-08:12:05 PM Z
 Re: Magnani Pescia et al.. for gumprinting10/27/05-07:57:04 AM Z
 Re: Enlarged Negatives from Scala originals10/27/05-07:12:06 AM Z
 Re: Magnani Pescia et al.. for gumprinting10/24/05-07:53:54 AM Z
 Re: salt printing questions10/23/05-09:09:06 PM Z
 Re: cyanotype with gum10/23/05-09:03:13 PM Z
 Re: salt printing questions10/22/05-08:20:54 AM Z
 Re: salt printing questions10/21/05-11:49:41 PM Z
 Re: A bit off-topic but I need help!10/21/05-11:48:21 PM Z
 Re: solar plate10/21/05-11:10:01 AM Z
 Re: two questions about watercolor paper10/21/05-07:58:03 AM Z
 salt printing questions10/21/05-07:41:22 AM Z
 Re: First tri-colour gum10/14/05-04:44:38 PM Z
 Re: First tri-colour gum10/14/05-03:35:14 PM Z
 Re: chromoskedasic sabattier10/14/05-03:34:16 PM Z
 chromoskedasic sabattier10/14/05-07:52:52 AM Z
 Re: Technical Grade Muriatic Acid10/09/05-09:35:38 PM Z
 acrylic posterization10/09/05-09:28:11 PM Z
 Re: Spam:*****, Re: Blue-Black Cyanotype & Luster10/04/05-08:44:55 PM Z
 Re: Blue-Black Cyanotype & Luster10/04/05-04:07:35 PM Z
 Re: Thomas Mezanotte?10/03/05-09:11:41 AM Z
 Re: mixing gum arabic10/03/05-08:17:56 AM Z
 re: mixing gum arabic10/02/05-11:56:44 PM Z
 Re: Using Gluteraldahyde; was: Glutaraldahyde activation?10/02/05-11:51:38 PM Z
christine shepherd
 Re: Palladium Chloride for Kallitype10/24/05-04:03:01 PM Z
 sodium chloropalladite10/21/05-02:58:14 PM Z
 Re: A bit off-topic but I need help!10/21/05-02:19:59 PM Z
 bryant labs10/19/05-05:17:28 PM Z
 Re: Effect of Tween 2010/17/05-11:17:52 AM Z
Clay
 Re: Best CI for process10/03/05-07:18:24 PM Z
 Re: Using Gluteraldahyde; was: Glutaraldahyde activation?10/03/05-04:50:47 AM Z
 Re: shadow density in zone III Raising highlights10/01/05-09:56:12 AM Z
comparsi
 Re: Moles to Grams Question10/04/05-10:38:15 AM Z
D. Mark Andrews
 RE: Blue-Black Cyanotype & Luster10/04/05-09:23:56 PM Z
 RE: Blue-Black Cyanotype & Luster10/04/05-08:24:56 AM Z
 RE: Blue-Black Cyanotype & Luster10/04/05-08:24:06 AM Z
 RE: Blue-Black Cyanotype & Luster10/04/05-08:03:43 AM Z
 RE: Blue-Black Cyanotype & Luster10/04/05-08:03:42 AM Z
 RE: Blue-Black Cyanotype & Luster10/04/05-07:53:56 AM Z
 RE: Blue-Black Cyanotype & Luster10/03/05-10:01:55 PM Z
 Blue-Black Cyanotype & Luster10/02/05-11:37:59 PM Z
Dan Burkholder
 Re: sources for uv exposure units or plate makers? (or any hints on how to get good good contct?)10/28/05-04:11:21 PM Z
 Re: I don't feel so lonely - Burkholder is coming up north.10/24/05-02:46:47 PM Z
 Re: Agfa to close doors10/23/05-03:22:18 PM Z
 Agfa to close doors10/22/05-05:11:52 AM Z
 Testing for Email10/15/05-08:19:10 PM Z
 Re: [inconsistent results with TXP10/13/05-11:40:16 AM Z
 Re: [inconsistent results with TXP10/13/05-10:28:29 AM Z
 RE: my first van dyke!!10/11/05-10:08:05 AM Z
 Re: my first van dyke!!10/11/05-09:56:54 AM Z
 Re: my first van dyke!!10/10/05-08:58:02 PM Z
 Re: my first van dyke!!10/10/05-08:19:53 PM Z
 Re: my first van dyke!!10/10/05-07:44:42 PM Z
 OT, Historical Photo Question10/10/05-11:15:50 AM Z
 Re: spot, averaging, or incident metering?10/01/05-06:06:42 AM Z
Dave Rose
 Re: Gum color printing10/31/05-09:25:23 PM Z
 Re: Magnani Pescia et al.. for gumprinting10/27/05-07:09:57 AM Z
 Re: cyanotype with gum10/23/05-08:57:21 PM Z
 Re: gelatin10/20/05-07:59:14 PM Z
 Re: wide-angle lens for 4x510/18/05-07:57:34 AM Z
 Re: Selective toning of cyanotypes-late reply10/16/05-08:53:24 AM Z
 Re: gum printing pigment10/10/05-06:56:02 AM Z
 Re: gum printing pigment10/09/05-08:55:22 AM Z
 Re: getting sizing materials10/08/05-08:17:39 AM Z
 Re: Selective toning of cyanotypes10/05/05-06:56:57 PM Z
 Re: Blue-Black Cyanotype & Luster10/04/05-07:34:55 PM Z
 Re: Blue-Black Cyanotype & Luster10/04/05-07:03:53 PM Z
 Re: Blue-Black Cyanotype & Luster10/04/05-07:18:01 AM Z
Dave Soemarko
 RE: Albumen workshop in NYC10/06/05-12:39:51 PM Z
David & Jan Harris
 Re: AccuArt2 transparencies vs. Pictorico OHP10/17/05-03:05:55 AM Z
David Barker
 Re: fixing salt prints10/15/05-07:03:44 PM Z
 Re: Moles to Grams Question10/04/05-10:13:03 AM Z
david drake
 Re: Enlarged Negatives from Scala originals10/27/05-11:36:50 AM Z
 Enlarged Negatives from Scala originals10/26/05-07:22:30 PM Z
 Re: Agfa to close doors/Agfa Scala question10/26/05-04:15:31 PM Z
davidhatton
 Re: Possibly the silliest Gum question ever!10/29/05-07:28:14 AM Z
 Many Thanks for your interest and awful warning. WAS: Re: Magnani Pescia et al.. for gumprinting10/29/05-06:50:49 AM Z
 Re: message about the availability of 8 by 10 Polaroid film10/27/05-08:13:07 AM Z
 Re: Magnani Pescia et al.. for gumprinting10/26/05-01:14:16 PM Z
 Re: Magnani Pescia et al.. for gumprinting10/26/05-01:08:06 PM Z
 Magnani Pescia et al.. for gumprinting10/24/05-06:32:04 AM Z
 It's up! WAS First Tricolour Gum10/18/05-11:41:27 AM Z
 Re: First tri-colour gum10/18/05-11:04:44 AM Z
 Re: wide-angle lens for 4x510/18/05-09:47:22 AM Z
 Re: First tri-colour gum10/18/05-02:55:23 AM Z
 Re: First tri-colour gum10/15/05-01:10:11 PM Z
 Re: First tri-colour gum10/15/05-01:02:36 PM Z
 Re: First tri-colour gum10/15/05-01:09:34 PM Z
 Re: First tri-colour gum10/15/05-12:56:16 PM Z
 First tri-colour gum10/14/05-12:17:03 PM Z
 Re: sensitiser problem was " "10/12/05-06:17:00 AM Z
 Re: Oh yeah, speaking of Aqua Regia !!! Off Topic10/10/05-03:56:39 AM Z
 Re: Technical Grade Muriatic Acid10/08/05-04:25:42 AM Z
 Re: Technical Grade Muriatic Acid10/06/05-02:14:12 PM Z
 Re: Blue-Black Cyanotype & Luster10/04/05-02:45:59 AM Z
 Re: Blue-Black Cyanotype & Luster10/04/05-02:42:20 AM Z
 Re: mixing gum arabic10/03/05-12:59:21 PM Z
 Re: mixing gum arabic10/03/05-03:09:04 AM Z
 Re: Thymol10/02/05-10:39:41 AM Z
Don Bryant
 RE: VDB10/13/05-11:07:55 AM Z
 RE: VDB10/13/05-10:17:26 AM Z
 RE: Technical Grade Muriatic Acid10/06/05-05:11:46 PM Z
 RE: spot, averaging, or incident metering?10/03/05-09:08:20 AM Z
Douglas King
 Re: road show10/01/05-12:15:25 PM Z
Ed Stander
 Vacuum Frame to anyone who can cart it away10/31/05-03:14:31 PM Z
Editor P.O.V. Image Service
 Re: Aqua Regia & Animation10/13/05-02:57:45 AM Z
Ehud Yaniv
 I don't feel so lonely - Burkholder is coming up north.10/24/05-12:34:26 AM Z
 RE: solar plate10/21/05-04:53:51 PM Z
Ender100@aol.com
 Re: Possibly the silliest Gum question ever!10/29/05-10:24:49 PM Z
 Re: OT; Wikipedia & Aqua Regia10/29/05-12:53:15 AM Z
 Re: Fume hood10/29/05-12:49:47 AM Z
 Re: Paper White/DMinnie10/26/05-11:03:34 AM Z
 Paper White/DMinnie10/25/05-09:45:26 PM Z
 Re: solar plate10/24/05-11:10:11 AM Z
 Re: Matte Translucent Film for inkjet printer, can someone recommend?10/24/05-12:06:24 AM Z
 Re: salt printing questions10/23/05-02:50:31 PM Z
 Re: Agfa to close doors10/23/05-02:46:25 PM Z
 Re: Matte Translucent Film for inkjet printer, can someone recommend?10/23/05-02:43:10 PM Z
 Re: chlorophyll prints. ??? was Vietnam10/21/05-08:50:37 PM Z
 Re: chromoskedasic sabattier10/14/05-09:30:25 PM Z
 Re: VDB10/13/05-01:40:35 PM Z
 Re: Oh yeah, speaking of Aqua Regia !!! Off Topic10/09/05-02:45:46 PM Z
 Re: gum printing pigment10/09/05-02:52:06 PM Z
 Re: Technical Grade Muriatic Acid10/06/05-11:54:09 AM Z
 Re: Albumen workshop in NYC10/06/05-11:55:15 AM Z
 Re: Epson 2200 Ink Disbursement10/06/05-01:53:16 AM Z
 Re: where do you keep your densitometer?  In the den?10/04/05-11:19:29 AM Z
 Re: Best CI for process10/04/05-01:14:51 AM Z
 Re: Step test and ES apples to apples10/03/05-06:58:03 PM Z
 Re: Best CI for process10/03/05-06:42:27 PM Z
 Re: Best CI for process10/03/05-12:36:06 PM Z
 Re: mixing gum arabic10/03/05-12:25:42 PM Z
 Re: Best CI for process10/03/05-12:19:58 PM Z
 Re: Best CI for process10/02/05-11:16:32 PM Z
 Re: Best CI for process10/02/05-11:24:45 AM Z
 Re: Best CI for process10/01/05-02:29:26 PM Z
Eric Maquiling
 Re: my first van dyke!!10/10/05-09:48:04 PM Z
 Re: my first van dyke!!10/10/05-07:40:09 PM Z
 Re: my first van dyke!!10/10/05-06:14:30 PM Z
 Re: my first van dyke!!10/10/05-05:49:30 PM Z
 my first van dyke!!10/10/05-05:19:15 PM Z
Eric Neilsen
 RE: Paper White/DMinnie10/26/05-06:54:13 AM Z
 RE: Palladium Chloride for Kallitype10/24/05-07:10:13 PM Z
 RE: Palladium Chloride for Kallitype10/24/05-06:17:25 PM Z
 RE: Matte Translucent Film for inkjet printer, can someone recommend?10/22/05-11:26:51 AM Z
 RE: Technical Grade Muriatic Acid10/09/05-11:40:48 PM Z
 RE: Spam:*****, Re: Blue-Black Cyanotype & Luster10/04/05-10:34:39 PM Z
 RE: Best CI for process10/04/05-09:26:40 AM Z
 RE: where do you keep your densitometer? In the den?10/04/05-08:17:24 AM Z
 RE: Best CI for process10/04/05-07:47:13 AM Z
 RE: Best CI for process10/03/05-07:26:28 PM Z
 RE: Step test and ES apples to apples10/03/05-07:18:13 PM Z
 RE: Best CI for process10/03/05-06:10:03 PM Z
 RE: Best CI for process10/03/05-05:26:41 PM Z
 Step test and ES apples to apples10/03/05-04:49:41 PM Z
 RE: Best CI for process10/03/05-04:08:49 PM Z
 RE: Best CI for process10/03/05-03:36:56 PM Z
 RE: Best CI for process10/03/05-03:05:29 PM Z
 RE: Best CI for process10/03/05-03:00:42 PM Z
 RE: Best CI for process10/03/05-11:59:51 AM Z
 RE: Best CI for process10/02/05-10:09:15 PM Z
 RE: Best CI for process10/02/05-10:46:13 AM Z
 RE: Best CI for process10/02/05-09:55:54 AM Z
 RE: Best CI for process10/02/05-09:19:24 AM Z
 RE: Best CI for process10/01/05-08:35:38 PM Z
 CI and platinum Negs10/01/05-09:05:10 AM Z
 RE: Best CI for process10/01/05-09:01:11 AM Z
Eric Nelson
 Re: Vietnam10/21/05-07:57:07 AM Z
 Re: fixing salt prints10/16/05-08:50:06 AM Z
 Re: How Much PMK10/02/05-01:11:36 PM Z
 Re: How Much PMK10/02/05-12:58:33 PM Z
Etienne Garbaux
 Re: Technical Grade Muriatic Acid10/08/05-12:29:34 AM Z
 RE: Technical Grade Muriatic Acid10/07/05-12:35:37 PM Z
 Re: Best CI for process10/02/05-12:13:30 AM Z
 Re: Best CI for process10/01/05-01:07:10 PM Z
 Re: Best CI for process09/30/05-10:54:02 PM Z
 Re: spot, averaging, or incident metering?09/30/05-10:14:17 PM Z
Eugene Robkin
 Problems in email headers10/29/05-10:07:06 PM Z
Fabiano Busdraghi
 RE: VDB10/17/05-02:15:42 AM Z
 RE: VDB10/13/05-02:38:34 AM Z
 Re: VDB10/13/05-01:42:38 AM Z
Galina Manikova
 Re: blue vandykes10/03/05-03:38:38 AM Z
 Re: blue vandykes10/01/05-10:42:23 AM Z
George L Smyth
 Re: Wikipedia10/21/05-05:58:35 AM Z
 Re: expiration dates on film boxes10/14/05-09:49:52 AM Z
 Re: my first van dyke!!10/11/05-06:28:59 AM Z
 Re: my first van dyke!!10/10/05-05:58:38 PM Z
Gerry Giliberti
 RE: sources for uv exposure units or plate makers? (or any hints on how toget good good contct?)10/31/05-08:18:52 AM Z
 RE: solar plate10/24/05-07:29:37 AM Z
 RE: [inconsistent results with TXP10/13/05-10:41:41 AM Z
 RE: NY Shows and galleries10/12/05-08:11:29 AM Z
 alt show10/11/05-11:24:09 AM Z
 RE: RLF COMPARISON10/06/05-07:18:20 AM Z
 RE: spot, averaging, or incident metering?10/03/05-09:49:11 AM Z
 RE: spot, averaging, or incident metering?10/03/05-07:05:21 AM Z
Giovanni Di Mase
 Re: Chrome Alum Hardening10/12/05-01:51:32 AM Z
Gordon J. Holtslander
 Re: Wikipedia10/22/05-10:19:31 AM Z
 Re: Wikipedia10/21/05-11:42:42 PM Z
 Re: First tri-colour gum10/15/05-09:53:52 PM Z
 Re: First tri-colour gum10/14/05-04:35:27 PM Z
Greg Schmitz
 Re: Technical Grade Muriatic Acid10/11/05-03:56:55 AM Z
Hamish Stewart
 Re: Magnani Pescia et al.. for gumprinting10/25/05-12:52:15 AM Z
 Re: Magnani Pescia et al.. for gumprinting10/24/05-04:41:29 PM Z
 Re: OT, Historical Photo Question10/12/05-11:43:21 PM Z
 Re: gum printing pigment10/09/05-06:04:24 AM Z
Hellena Cleary
 solar plate10/21/05-10:38:10 AM Z
henk thijs
 Re: Blue-Black Cyanotype & Luster10/04/05-02:07:46 PM Z
 Re: Blue-Black Cyanotype & Luster10/04/05-07:29:07 AM Z
holtsg@duke.usask.ca
 Alt-photo Reminder10/31/05-12:00:01 AM Z
 Alt-photo Reminder10/24/05-12:00:00 AM Z
 Alt-photo Reminder10/17/05-12:00:00 AM Z
 Alt-photo Reminder10/10/05-12:00:00 AM Z
 Alt-photo Reminder10/03/05-12:00:00 AM Z
 Alt-Photo Monthly Reminder10/01/05-12:00:00 AM Z
hylandscot@comcast.net
 Re: expiration dates on film boxes10/14/05-07:41:21 AM Z
Jack Brubaker
 Re: OT, Historical Photo Question10/10/05-03:01:49 PM Z
 Re: Blue-Black Cyanotype & Luster10/05/05-02:21:43 PM Z
 Re: Spam:*****, Re: Blue-Black Cyanotype & Luster10/05/05-02:14:38 PM Z
Jack Fulton
 Re: gelatin10/20/05-09:04:06 AM Z
 Re: Blue-Black Cyanotype & Luster10/17/05-07:01:23 PM Z
 Re: Technical Grade Muriatic Acid10/07/05-06:56:23 AM Z
 Re: Technical Grade Muriatic Acid10/06/05-09:53:19 PM Z
 Re: Epson 2200 Ink Disbursement10/05/05-11:37:12 PM Z
 Re: Blue-Black Cyanotype & Luster10/04/05-08:12:12 AM Z
 Re: Blue-Black Cyanotype & Luster10/03/05-10:46:05 PM Z
Jacques Augustowski
 Gum color printing10/30/05-10:03:53 PM Z
jamesromeo@mac.com
 Re: Bad Vandyke ?10/11/05-03:46:58 PM Z
Jeff Sumner
 Re: Aqua regia/Nobel prize10/28/05-10:14:00 PM Z
 Re: Wikipedia10/22/05-03:35:54 PM Z
 Re: Wikipedia10/22/05-12:16:01 AM Z
 Wikipedia10/20/05-10:11:38 PM Z
Jeffrey D. Mathias
 Re: Best CI for process10/02/05-01:15:45 PM Z
 Re: shadow density in zone III10/02/05-01:07:29 PM Z
 How Much PMK10/02/05-12:37:11 PM Z
Jim Strain
 Re: wide-angle lens for 4x510/18/05-10:15:00 AM Z
joachim oppenheimer
 RE: Rollo pyro, bromide and fogged film10/13/05-07:35:52 PM Z
 RE: [inconsistent results with TXP10/13/05-10:47:20 AM Z
 RE: NY Shows and galleries10/11/05-06:19:35 PM Z
Joe Smigiel
 Re: Enlarged Negatives from Scala originals10/26/05-09:35:00 PM Z
 Re: salt printing questions10/23/05-10:25:46 PM Z
 Re: salt printing questions10/23/05-05:32:34 PM Z
 Re: salt printing questions10/22/05-03:26:37 PM Z
 Re: my first van dyke!!10/10/05-09:28:39 PM Z
 RE: Best CI for process10/03/05-04:57:01 PM Z
 RE: Best CI for process10/02/05-12:30:24 PM Z
John Brewer
 Re: A bit off-topic but I need help!10/21/05-04:20:05 PM Z
 Re: First tri-colour gum10/14/05-01:20:59 PM Z
 Re: gum printing pigment10/08/05-01:30:16 PM Z
John Cremati
 Making PlatniumChloride out of Platinum wire10/24/05-11:42:20 AM Z
 wide-angle lens for 4x510/18/05-04:36:35 PM Z
 Re: wide-angle lens for 4x510/18/05-09:06:40 AM Z
 modern metering the little green "A".10/01/05-04:25:38 PM Z
John Edwards
 Re: (why no subjects?)10/22/05-12:00:09 AM Z
 Re: (why no subjects?)10/21/05-11:56:59 PM Z
John Roseborough
 Re: Testing for Email10/15/05-08:46:04 PM Z
JohnDixon20@aol.com
 Re: Technical Grade Muriatic Acid10/06/05-09:51:47 AM Z
Jon Lybrook
 Re: sources for uv exposure units or plate makers? (or any hints onhow toget good good contct?)10/30/05-08:23:32 AM Z
 Re: sources for uv exposure units or plate makers? (or any hints on how to get good good contct?)10/28/05-06:45:35 PM Z
 Re: solar plate10/21/05-05:12:39 PM Z
 Re: AccuArt2 transparencies vs. Pictorico OHP10/19/05-11:52:54 AM Z
 Re: AccuArt2 transparencies vs. Pictorico OHP10/17/05-09:09:48 AM Z
 AccuArt2 transparencies vs. Pictorico OHP10/17/05-12:45:25 AM Z
 Epson 2200 Ink Disbursement10/05/05-10:11:34 PM Z
Jonathan Bailey
 Oriental print washer question10/16/05-12:49:41 PM Z
jpptprnt@verizon.net
 Re: Re: solar plate10/24/05-10:34:47 AM Z
 Re: Re: chromoskedasic sabattier10/15/05-12:25:34 AM Z
 Re: expiration dates on film boxes10/13/05-12:15:09 PM Z
jt allen
 Re: polaroid camera question10/25/05-09:00:42 AM Z
 polaroid camera question10/24/05-08:29:15 PM Z
jude.taylor@comcast.net
 Re: salt printing questions10/21/05-12:58:12 PM Z
 Re: AccuArt2 transparencies vs. Pictorico OHP10/17/05-06:22:26 AM Z
 RE: P.S. RE: fixing salt prints10/16/05-10:02:53 AM Z
 Re: fixing salt prints10/16/05-09:54:58 AM Z
 Re: fixing salt prints10/16/05-09:49:34 AM Z
 RE: fixing salt prints10/15/05-01:30:01 PM Z
 P.S. RE: fixing salt prints10/15/05-01:32:16 PM Z
 fixing salt prints10/15/05-09:03:42 AM Z
 Re: Ready Made POP10/13/05-02:42:09 PM Z
Judy Seigel
 Re: Magnani Pescia et al.. for gumprinting10/28/05-02:58:09 PM Z
 Re: Gum over Palladium10/28/05-02:40:42 PM Z
 Re: Cyanotype: Ag 4110/28/05-02:34:21 PM Z
 Re: OT; Wikipedia & Aqua Regia10/28/05-02:24:52 PM Z
 Re: Cyanotype: Ag 4110/25/05-12:27:29 AM Z
 RE: salt printing questions10/24/05-07:25:39 PM Z
 Re: Magnani Pescia et al.. for gumprinting10/24/05-07:24:28 PM Z
 RE: DIY Fume Hood10/24/05-06:54:11 PM Z
 Re: Acceptable Chemical Grades For Alt?10/21/05-01:24:53 PM Z
 Re: gelatin10/21/05-01:12:54 PM Z
 Re: Iron Blue Bleed/Stain10/21/05-12:59:25 PM Z
 RE: VDB10/21/05-12:53:10 PM Z
 Re: Blue-Black Cyanotype & Luster10/19/05-12:53:46 AM Z
 RE: VDB10/19/05-12:45:27 AM Z
 Eder again10/19/05-12:28:13 AM Z
 Reading Eder10/18/05-11:55:57 PM Z
 RE: VDB10/16/05-09:07:36 PM Z
 Re: Blue-Black Cyanotype & Luster10/16/05-08:41:07 PM Z
 RE: VDB10/15/05-11:11:25 PM Z
 Re: Aqua Regia & Animation10/15/05-11:12:13 PM Z
 Re: Aqua Regia & Animation10/12/05-11:25:43 PM Z
 Safety suggestions for aqua regia10/10/05-11:11:14 PM Z
 Re: my first van dyke!!10/10/05-09:51:29 PM Z
 Re: OT, Historical Photo Question10/10/05-09:44:40 PM Z
 Oh yeah, speaking of Aqua Regia !!!10/09/05-01:06:34 PM Z
 Re: Technical Grade Muriatic Acid10/09/05-10:22:06 AM Z
 Re: Blue-Black Cyanotype & Luster10/06/05-02:11:04 PM Z
 Re: Albumen workshop in NYC10/06/05-12:33:20 PM Z
 Re: Technical Grade Muriatic Acid10/06/05-11:23:12 AM Z
 Albumen workshop in NYC10/06/05-11:13:47 AM Z
 RE: blue vandykes10/04/05-09:41:12 PM Z
 RE: Blue-Black Cyanotype & Luster10/04/05-09:34:28 PM Z
 Re: Blue-Black Cyanotype & Luster10/04/05-09:32:16 PM Z
 Re: Blue-Black Cyanotype & Luster10/04/05-09:24:08 PM Z
 Re: Blue-Black Cyanotype & Luster10/04/05-08:53:44 PM Z
Kai Hamann
 Re: sources for uv exposure units or plate makers? (or any hints on how toget good good contct?)10/28/05-03:40:41 PM Z
 Re: Agfa to close doors/Agfa Scala question10/26/05-04:38:32 PM Z
 Re: Eder again10/20/05-11:40:44 AM Z
 Re: Blue-Black Cyanotype & Luster10/18/05-08:59:36 AM Z
 Re: Blue-Black Cyanotype & Luster10/17/05-10:37:15 AM Z
 Re: Blue-Black Cyanotype & Luster10/16/05-10:50:50 AM Z
 Re: Blue-Black Cyanotype & Luster10/05/05-12:07:54 PM Z
 Re: Blue-Black Cyanotype & Luster10/05/05-08:40:34 AM Z
 Re: Blue-Black Cyanotype & Luster10/04/05-04:12:36 PM Z
 Re: Blue-Black Cyanotype & Luster10/04/05-12:23:24 PM Z
Kate M
 RE: Gelatin sizing/cyan/gum10/26/05-01:48:47 PM Z
 RE: Magnani Pescia et al.. for gumprinting10/24/05-01:57:34 PM Z
 RE: I don't feel so lonely - Burkholder is coming up north.10/24/05-02:02:13 PM Z
 RE: A bit off-topic but I need help!10/24/05-12:14:14 AM Z
 A bit off-topic but I need help!10/21/05-01:40:16 PM Z
 RE: Toning VDB before fixing with selenium10/17/05-06:40:43 PM Z
 RE: Toning VDB before fixing with selenium10/17/05-04:23:54 PM Z
Katharine Thayer
 Re: Gum over Palladium10/31/05-10:45:48 AM Z
 Re: Gum over Palladium10/31/05-10:38:11 AM Z
 Re: Gum over Palladium10/30/05-05:50:55 AM Z
 Re: Possibly the silliest Gum question ever!10/29/05-03:11:48 AM Z
 Re: Many Thanks for your interest and awful warning. WAS: Re: Magnani Pescia et al.. for gumprinting10/29/05-03:02:42 AM Z
 Re: Gum over Palladium10/28/05-04:21:45 PM Z
 Re: Gum over Palladium10/28/05-04:36:07 AM Z
 Re: Possibly the silliest Gum question ever!10/27/05-10:41:57 AM Z
 Re: Magnani Pescia et al.. for gumprinting10/27/05-03:26:13 AM Z
 Re: Gum over Palladium10/27/05-02:23:29 AM Z
 Re: Magnani Pescia et al.. for gumprinting10/26/05-10:07:23 AM Z
 Arches Platine10/26/05-04:04:22 AM Z
 Re: Gum over Palladium10/26/05-03:46:59 AM Z
 Re: Magnani Pescia et al.. for gumprinting10/25/05-04:43:07 AM Z
 Re: Magnani Pescia et al.. for gumprinting10/25/05-03:34:34 AM Z
 Re: Magnani Pescia et al.. for gumprinting10/24/05-12:52:50 PM Z
 Re: Magnani Pescia et al.. for gumprinting10/24/05-10:56:18 AM Z
 Re: Magnani Pescia et al.. for gumprinting10/24/05-04:19:41 AM Z
 Re: Wikipedia10/22/05-01:43:43 AM Z
 Re: two questions about watercolor paper10/20/05-06:53:44 AM Z
 Re: First tri-colour gum10/16/05-02:51:56 AM Z
 Re: OT, Historical Photo Question10/10/05-05:08:45 AM Z
 Re: gum printing pigment10/09/05-03:10:11 AM Z
 Re: Blue-Black Cyanotype & Luster10/04/05-02:34:10 AM Z
 Re: Questions on hardening gelatin10/03/05-06:20:19 AM Z
 Re: Best CI for process10/02/05-01:54:33 PM Z
 Re: Using Gluteraldahyde; was: Glutaraldahyde activation?10/02/05-04:41:21 AM Z
 Re: Using Gluteraldahyde; was: Glutaraldahyde activation?10/01/05-01:39:19 AM Z
Kees Brandenburg
 Re: Using Gluteraldahyde; was: Glutaraldahyde activation?10/03/05-02:54:40 AM Z
Keith Gerling
 Chrome Alum Hardening10/11/05-02:41:08 PM Z
 RE: Questions on hardening gelatin10/03/05-05:15:31 PM Z
 RE: Questions on hardening gelatin10/03/05-03:25:21 PM Z
 Another gelatin hardening question10/03/05-10:16:49 AM Z
 Questions on hardening gelatin10/03/05-10:07:50 AM Z
Kerik
 Re: Magnani Pescia et al.. for gumprinting10/25/05-11:51:35 AM Z
 Re: two questions about watercolor paper10/20/05-01:43:56 PM Z
 Re: OT, Historical Photo Question10/10/05-11:38:22 AM Z
 Re: Gum Over Platinum (was Albumen) workshop in NYC10/06/05-12:22:33 PM Z
Kina Marlyn
 Can You 0wn a R0LEX King At $250? Yes seven10/01/05-10:13:21 AM Z
kris
 Re: Blue-Black Cyanotype & Luster10/03/05-10:27:15 PM Z
Larry Heath
 Re: wide-angle lens for 4x510/18/05-09:54:44 AM Z
Liam Lawless
 RE: salt printing questions10/15/05-12:33:54 PM Z
 RE: VDB10/08/05-12:50:38 PM Z
 RE: P.S. RE: fixing salt prints10/08/05-12:01:12 AM Z
 RE: fixing salt prints10/07/05-03:52:39 AM Z
 RE: Oh yeah, speaking of Aqua Regia !!! Off Topic10/01/05-10:40:42 AM Z
Loris Medici
 RE: Gum over Palladium10/26/05-02:04:21 AM Z
 RE: Gum over Palladium10/26/05-01:50:55 AM Z
 RE: Matte Translucent Film for inkjet printer, can someone recommend?10/22/05-01:29:10 PM Z
 RE: salt printing questions10/21/05-08:04:32 AM Z
 RE: two questions about watercolor paper10/21/05-01:06:42 AM Z
 RE: VDB10/20/05-04:19:21 AM Z
 RE: wide-angle lens for 4x510/18/05-08:06:38 AM Z
 RE: Toning VDB before fixing with selenium10/17/05-04:27:24 AM Z
 RE: VDB10/17/05-01:50:49 AM Z
 RE: Fixing Satista prints10/17/05-01:22:29 AM Z
 RE: VDB10/16/05-06:19:26 AM Z
 RE: First tri-colour gum10/16/05-05:55:49 AM Z
 RE: VDB10/16/05-05:50:52 AM Z
 RE: First tri-colour gum10/14/05-06:34:36 PM Z
 RE: VDB10/13/05-09:54:43 AM Z
 RE: VDB10/13/05-05:53:23 AM Z
 RE: VDB10/13/05-01:59:14 AM Z
 RE: sensitiser problem was " "10/12/05-06:37:27 AM Z
 RE: OT, Historical Photo Question10/10/05-10:52:50 PM Z
 RE: gum printing pigment10/08/05-01:39:04 PM Z
 RE: Technical Grade Muriatic Acid10/07/05-01:53:11 PM Z
 RE: Technical Grade Muriatic Acid10/07/05-01:41:03 AM Z
 RE: Technical Grade Muriatic Acid10/06/05-11:05:36 AM Z
 RE: Technical Grade Muriatic Acid10/06/05-11:04:28 AM Z
 RE: Blue-Black Cyanotype & Luster10/04/05-08:04:50 AM Z
 RE: Blue-Black Cyanotype & Luster10/04/05-07:28:19 AM Z
 RE: Blue-Black Cyanotype & Luster10/04/05-01:57:33 AM Z
 RE: mixing gum arabic10/03/05-02:04:09 PM Z
 RE: Cyanotype - Tannic Acid toning10/03/05-08:30:07 AM Z
 Cyanotype - Tannic Acid toning10/03/05-08:18:18 AM Z
 RE: mixing gum arabic10/03/05-06:40:14 AM Z
 RE: blue vandykes10/03/05-01:51:39 AM Z
Malin Fabbri
 Does anyone know of a petition to Polaroid re: Time Zero film?10/06/05-06:54:37 AM Z
 Polaroid SX-70 problems not over yet! :-(10/05/05-02:03:06 AM Z
Marek Matusz
 RE: A bit off-topic but I need help!10/21/05-02:04:11 PM Z
 RE: salt printing questions10/21/05-01:59:52 PM Z
 Re: Technical Grade Muriatic Acid10/06/05-11:20:37 AM Z
 Re: Blue-Black Cyanotype & Luster10/04/05-08:04:57 PM Z
 Re: Blue-Black Cyanotype & Luster10/04/05-07:50:32 PM Z
maria ahlberg
 gum printing pigment10/08/05-01:03:41 PM Z
 Re: mixing gum arabic10/03/05-08:19:45 AM Z
 re: mixing gum arabic10/03/05-12:51:17 AM Z
 gum powder10/02/05-11:14:02 AM Z
 Thymol10/02/05-10:26:27 AM Z
MARTINM
 Re: Chrome Alum Hardening10/11/05-09:51:31 PM Z
 Re: Technical Grade Muriatic Acid10/11/05-04:30:56 AM Z
 Re: Questions on hardening gelatin10/04/05-06:24:37 AM Z
Michael Hopper
 Re: Albumen workshop in NYC10/06/05-12:32:53 PM Z
Michael Koch-Schulte
 Re: Fume hood10/31/05-09:48:01 AM Z
 Vacuum Frame Plans with Hand Operated Vacuum Pump10/31/05-07:56:52 AM Z
 Plans for a Cheap Collimated UV Light Source10/30/05-10:00:16 AM Z
 Re: Possibly the silliest Gum question ever!10/29/05-07:07:50 PM Z
 Uranotype, Urano-Chrysotype and Fiestaware10/29/05-07:34:04 AM Z
 Re: Fume hood10/28/05-02:26:14 PM Z
 Re: DIY Fume Hood10/25/05-08:09:08 PM Z
 Re: Making PlatniumChloride out of Platinum wire10/24/05-11:05:56 AM Z
 DIY Fume Hood10/23/05-10:09:17 AM Z
 Re: Wikipedia10/22/05-07:16:20 AM Z
 Re: Bromo-iodide Silver Gelatin Emulsion as an Alternative process.10/20/05-08:19:37 PM Z
 Acceptable Chemical Grades For Alt?10/18/05-06:34:31 PM Z
 Fw: Effect of Tween 2010/17/05-04:09:35 PM Z
 Effect of Tween 2010/16/05-07:44:38 PM Z
 Re: VDB10/13/05-12:20:52 PM Z
 Re: Aqua Regia & Animation10/13/05-10:24:21 AM Z
 Re: VDB10/13/05-10:17:55 AM Z
 Re: VDB10/13/05-08:19:31 AM Z
 Step Wedge Junkies Unite10/09/05-08:44:25 PM Z
 Re: Technical Grade Muriatic Acid10/07/05-06:10:24 PM Z
 Re: Technical Grade Muriatic Acid10/06/05-01:37:41 PM Z
 Re: Technical Grade Muriatic Acid10/06/05-01:29:26 PM Z
 Re: Technical Grade Muriatic Acid10/06/05-10:27:47 AM Z
 Technical Grade Muriatic Acid10/06/05-09:43:12 AM Z
 Re: Moles to Grams Question10/04/05-10:35:28 AM Z
 Moles to Grams Question10/04/05-08:59:41 AM Z
 Re: Best CI for process10/01/05-04:26:40 PM Z
Nick Zentena
 Re: A bit off-topic but I need help!10/21/05-02:18:22 PM Z
 Re: OT, Historical Photo Question10/10/05-11:22:57 AM Z
Peter Marshall
 Re: Cyanotype: Ag 4110/28/05-03:17:04 PM Z
 Re: Cyanotype: Ag 4110/25/05-05:31:36 AM Z
 Cyanotype: Ag 4110/21/05-02:17:31 PM Z
Peter McDonald
 Re: salt printing questions -> apropos stains on hands10/22/05-12:55:33 AM Z
 Rollo pyro, bromide and fogged film10/13/05-06:05:00 PM Z
Photogecko Austin
 Re: I don't feel so lonely - Burkholder is coming up north.10/24/05-01:22:03 AM Z
Raven Weiss
 Re: RLF COMPARISON / new night photo site10/04/05-10:24:02 AM Z
REDROCKET
 chlorophyll prints. ??? was Vietnam10/21/05-07:29:04 PM Z
RHobbs3@aol.com
 Re: Possibly the silliest Gum question ever!10/29/05-10:32:27 PM Z
 Re: OT; Wikipedia & Aqua Regia - OT, Stamp Collections10/29/05-03:36:21 PM Z
 Aqua regia/Nobel prize10/28/05-08:41:41 PM Z
 Re: Iron Blue Bleed/Stain10/21/05-08:26:14 PM Z
 Iron Blue Bleed/Stain10/19/05-10:40:48 AM Z
 Iron Blue Bleeding and Staining10/18/05-01:36:17 PM Z
 Re: Testing for Email10/15/05-08:23:34 PM Z
 Re: VDB10/12/05-08:20:10 PM Z
 Re: Safety suggestions for aqua regia10/11/05-06:32:06 PM Z
 Re: (no subject)10/11/05-06:25:43 PM Z
 Re: OT, Historical Photo Question10/10/05-06:49:58 PM Z
Richard Corbett
 RE: where do you keep your densitometer? In the den?10/04/05-08:37:54 AM Z
Richard Knoppow
 Re: salt printing questions10/23/05-06:39:30 PM Z
 Re: salt printing questions10/22/05-04:16:13 PM Z
 Re: Agfa to close doors10/22/05-02:46:25 PM Z
 Re: Reading Eder10/19/05-06:34:14 AM Z
 Re: Iron Blue Bleeding and Staining10/18/05-06:21:46 PM Z
 Re: wide-angle lens for 4x510/18/05-06:20:20 PM Z
 Attention John Roseborough10/17/05-06:45:05 PM Z
 Re: Blue-Black Cyanotype & Luster10/17/05-06:42:31 PM Z
 Re: Testing for Email10/16/05-10:18:08 PM Z
 Re: Testing for Email10/15/05-09:56:59 PM Z
 Re: shaking up your stock solution10/15/05-11:00:24 AM Z
 Re: expiration dates on film boxes10/13/05-02:12:51 PM Z
 Re: OT, Historical Photo Question10/10/05-02:58:06 PM Z
 Re: Technical Grade Muriatic Acid10/09/05-07:17:06 PM Z
 Re: Technical Grade Muriatic Acid10/09/05-10:10:55 PM Z
 Re: Best CI for process10/02/05-09:17:46 PM Z
 Re: Best CI for process10/02/05-04:00:04 PM Z
 Re: Best CI for process10/01/05-05:36:06 PM Z
Ritab19106@aol.com
 Re: Matte Translucent Film for inkjet printer, can someone recommend?10/24/05-06:53:11 AM Z
 Re: Matte Translucent Film for inkjet printer, can someone recommend?10/23/05-05:05:00 PM Z
Robert W. Schramm
 RE: DIY Fume Hood10/23/05-08:54:44 PM Z
roman sokoler
 Re: OT, Historical Photo Question10/10/05-02:59:55 PM Z
roy beecher
 Re: First tri-colour gum10/18/05-10:11:26 AM Z
ryberg
 Re: two questions about watercolor paper10/21/05-10:23:41 AM Z
 two questions about watercolor paper10/20/05-12:24:39 PM Z
 Re: Blue-Black Cyanotype & Luster10/04/05-01:19:38 PM Z
Ryuji Suzuki
 online resource (was Re: Paper White/DMinnie)10/26/05-02:14:55 AM Z
 speaking of emulsions10/20/05-09:51:31 PM Z
 Re: Bromo-iodide Silver Gelatin Emulsion as an Alternative process.10/20/05-09:43:18 PM Z
 Re: Iron Blue Bleeding and Staining10/19/05-01:52:42 AM Z
 Re: Iron Blue Bleeding and Staining10/18/05-02:22:41 PM Z
 Re: expiration dates on film boxes10/14/05-01:12:14 AM Z
 Re: Technical Grade Muriatic Acid10/11/05-03:16:20 AM Z
 Re: Technical Grade Muriatic Acid10/08/05-03:19:31 AM Z
 Re: VDB toning with sulfide toner?10/04/05-01:20:28 AM Z
 Re: Questions on hardening gelatin10/03/05-07:33:15 PM Z
 Re: Questions on hardening gelatin10/03/05-07:47:00 PM Z
 RE: Questions on hardening gelatin10/03/05-01:42:29 PM Z
 Re: Best CI for process10/03/05-01:00:46 PM Z
 Re: Questions on hardening gelatin10/03/05-12:41:35 PM Z
 Re: VDB toning with sulfide toner?10/03/05-07:30:28 AM Z
 Re: Using Gluteraldahyde; was: Glutaraldahyde activation?10/03/05-07:20:03 AM Z
 Re: Best CI for process10/01/05-10:15:44 PM Z
 Re: Best CI for process10/01/05-06:18:35 PM Z
 Fujifilm announced new film cameras10/01/05-05:51:53 PM Z
 Re: Best CI for process10/01/05-02:32:33 PM Z
 Re: Best CI for process10/01/05-02:29:46 PM Z
sam wang
 Re: report on cynotype and acid and a chemistry question.10/28/05-07:49:39 AM Z
 Re: Gum over Palladium10/26/05-06:37:20 AM Z
Sandy King
 Palladium Chloride for Kallitype10/24/05-03:49:02 PM Z
 RE: Toning VDB before fixing with selenium10/17/05-05:40:37 PM Z
 Re: [SPAM] Re: expiration dates on film boxes10/14/05-05:35:38 PM Z
 RE: my first van dyke!!10/11/05-08:55:38 AM Z
 Re: my first van dyke!!10/10/05-07:54:00 PM Z
 RE: Best CI for process10/04/05-09:12:31 AM Z
 RE: Best CI for process10/03/05-07:12:28 PM Z
 RE: Best CI for process10/03/05-07:03:19 PM Z
 RE: Best CI for process10/03/05-05:36:32 PM Z
 RE: Best CI for process10/03/05-05:25:53 PM Z
 RE: Best CI for process10/03/05-04:40:24 PM Z
 RE: Best CI for process10/03/05-03:48:58 PM Z
 RE: Best CI for process10/03/05-03:22:07 PM Z
 RE: Best CI for process10/03/05-03:11:14 PM Z
 Re: Best CI for process10/03/05-03:00:11 PM Z
 Re: Best CI for process10/03/05-07:39:16 AM Z
 Re: How Much PMK10/03/05-06:20:36 AM Z
 RE: Best CI for process10/02/05-10:20:49 PM Z
 Re: How Much PMK10/02/05-10:12:57 PM Z
 Re: Best CI for process10/02/05-09:35:58 PM Z
 Re: Best CI for process10/02/05-01:57:05 PM Z
 Re: How Much PMK10/02/05-12:58:23 PM Z
 RE: Best CI for process10/02/05-12:51:35 PM Z
 RE: Best CI for process10/02/05-12:44:53 PM Z
 RE: Best CI for process10/02/05-12:03:36 PM Z
 RE: Best CI for process10/02/05-10:14:13 AM Z
 RE: Best CI for process10/01/05-10:02:37 PM Z
 Re: Best CI for process10/01/05-02:43:40 PM Z
 Re: Best CI for process10/01/05-02:15:35 PM Z
 Re: Best CI for process10/01/05-11:50:35 AM Z
 Re: Best CI for process10/01/05-10:29:16 AM Z
 RE: Best CI for process10/01/05-10:19:45 AM Z
 Re: Best CI for process10/01/05-08:12:24 AM Z
Shannon Stoney
 Re: Gum over Palladium10/31/05-02:45:01 PM Z
 Re: wide-angle lens for 4x510/18/05-01:39:22 PM Z
 RE: wide-angle lens for 4x510/18/05-10:05:45 AM Z
 wide-angle lens for 4x510/18/05-07:37:04 AM Z
 shaking up your stock solution10/15/05-07:06:22 AM Z
 Re: [inconsistent results with TXP10/13/05-12:40:18 PM Z
 expiration dates on film boxes10/13/05-11:30:34 AM Z
 Re: [inconsistent results with TXP10/13/05-11:13:34 AM Z
 [inconsistent results with TXP10/13/05-09:56:15 AM Z
 Re: NY Shows and galleries10/11/05-06:44:35 PM Z
 Re: where do you keep your densitomet er? In the den?10/04/05-07:40:57 PM Z
 where do you keep your densitometer? In the den?10/04/05-07:39:05 AM Z
 Re: Best CI for process10/04/05-07:46:59 AM Z
 Re: Best CI for process10/01/05-09:58:37 AM Z
 modern metering10/01/05-08:20:46 AM Z
 Re: spot, averaging, or incident metering?10/01/05-08:12:56 AM Z
 zone II10/01/05-07:49:29 AM Z
 Re: spot, averaging, or incident metering?10/01/05-08:08:51 AM Z
Smhartphoto@cs.com
 Ray Gum10/31/05-08:44:36 PM Z
Stane Kocar
 Toning VDB before fixing with selenium10/17/05-04:18:36 AM Z
 Re: VDB toning with sulfide toner?10/04/05-12:44:22 AM Z
 VDB toning with sulfide toner?10/03/05-04:10:23 AM Z
SteveS
 Re: Paper White/DMinnie10/26/05-12:20:14 AM Z
 Re: A bit off-topic but I need help!10/21/05-01:48:41 PM Z
 Re: Acceptable Chemical Grades For Alt?10/20/05-09:26:36 AM Z
 Re: Oriental print washer question10/16/05-03:15:07 PM Z
 Re: expiration dates on film boxes10/13/05-01:06:43 PM Z
 Re: [inconsistent results with TXP10/13/05-12:54:07 PM Z
 Ready Made POP10/13/05-12:10:00 PM Z
 Re: [inconsistent results with TXP10/13/05-12:00:03 PM Z
 Re: How Much PMK10/03/05-01:05:25 AM Z
 Re: How Much PMK10/03/05-12:58:54 AM Z
 Re: How Much PMK10/02/05-09:47:54 PM Z
 Re: How Much PMK10/02/05-09:44:22 PM Z
 Re: modern metering10/02/05-12:29:23 PM Z
 Re: shadow density in zone III Raising highlights10/02/05-12:25:47 PM Z
 Re: shadow density in zone III Raising highlights09/30/05-11:48:34 PM Z
STUART GOLDSTEIN
 RE: NY Shows and galleries10/12/05-12:29:16 PM Z
 Re: NY Shows and galleries10/11/05-09:02:05 PM Z
Susan Huber
 message about the availability of 8 by 10 Polaroid film10/27/05-06:27:12 AM Z
Suzy Currell
 unsubscribe alt-photo-process-l10/24/05-04:05:10 AM Z
T. E. Andersen
 Re: report on cynotype and acid and a chemistry question.10/26/05-07:31:47 AM Z
 Re: report on cynotype and acid and a chemistry question.10/25/05-08:42:01 AM Z
 Re: Bromo-iodide Silver Gelatin Emulsion as an Alternative process.10/22/05-04:24:22 PM Z
 Re: Bromo-iodide Silver Gelatin Emulsion as an Alternative process.10/22/05-04:04:45 PM Z
 Re: Bromo-iodide Silver Gelatin Emulsion as an Alternative process.10/20/05-05:29:16 PM Z
TalCshare@aol.com
 Re: Agfa to close doors/Agfa Scala question10/26/05-08:29:15 PM Z
 Re: Agfa to close doors/Agfa Scala question10/26/05-02:51:40 PM Z
 Re: Agfa to close doors10/22/05-01:57:38 PM Z
Tom Ferguson
 Re: my first van dyke!!10/11/05-10:00:52 AM Z
Tom Hawkins
 RE: NY Shows and galleries10/12/05-02:33:28 PM Z
trevor cunningham
 Re: First tri-colour gum10/14/05-05:34:54 PM Z
 Re: getting sizing materials10/08/05-09:05:21 AM Z
 getting sizing materials10/08/05-08:01:44 AM Z
Venkatram Iyer
 Re: salt printing questions10/23/05-09:13:35 AM Z
 Fixing Satista prints10/16/05-10:05:21 AM Z
 Re: Selective toning of cyanotypes-late reply10/16/05-09:54:24 AM Z
 Selective toning of cyanotypes10/05/05-05:11:26 PM Z
wcharmon@wt.net
 Re: Gum over Palladium10/28/05-11:39:30 AM Z
 RE: Best CI for process10/03/05-12:09:28 PM Z
Weber, Scott
 gelatin10/20/05-08:15:10 AM Z
 VDB10/12/05-04:09:31 PM Z
 Bad VanDyke solution?10/11/05-03:30:29 PM Z
 RE: OT, Historical Photo Question10/10/05-11:39:15 AM Z
William Barnett-Lewis
 Finally making that first small step10/21/05-08:45:17 PM Z

This archive was generated by hypermail 2.1.8 : 11/07/05-09:46:20 AM Z CST